LINEAR DC POWER SUPPLY

13.8 VOLTS @ UP TO 3 AMPS CONTINUOUS + 5A SURGE
BRAND NEW IN BOX - 6 Months Warranty

High quality TENMA linear DC power supply that is great for powering many devices with with either it's banana jack or cigarette lighter receptacle.

The power supply is much better at running your equipment cooler than most standard wall warts or bricks. Since it is of linear design instead of the lightweight supplies that are getting more popular it will also  create less noise.

Most small DC power supplies sold at Radio Shack today for $29.95 are switching type and only weigh a few ounces. This compact linear supply weighs over 4 1/2 pounds.

The voltage is fixed at 13.8 volts and the amps that are drawn are shown on the AMP meter.

        Product Description

• Color coded binding posts accept banana plugs, spade and ring terminals or bare wire
• Front panel cigarette lighter receptacle
• Lighted rocker switch
• Analog current meter
• Over current protection
• Fuse protection
• Attached 6' three prong grounded power cord
  
  Specifications:
• Output voltage: 13.8VDC
• Ripple voltage: 20mV
• Continuous output current: 3A
• Surge current: 5A
• Line regulation 1.5%
• Load regulation 1.5%
• Input voltage: 110 ~ 127VAC, 60Hz
• Dimensions: 3 1/4" (H) x 4 1/2" (W) x 7" (D)

$34.95 + $12.95  S/H/I in the continental USA

$41.95 + $12.95  S/H/I in the continental USA

$44.95 + $12.95  S/H/I in the continental USA

Universal Test Lead Cable Kit

Allows the quick installation of whichever ends are appropriate for the occasion. The leads easily screw into the metal jacks in the ends of the 36 inch long red and black cables

POWER SUPPLY LEADS / CABLES
TWIN 36" CABLES  / RED + BLACK  -  BANANA PLUGS TO ALLIGATOR CLIPS

The Power Supply Cable / Lead is appropriate for small DC power supplies up to 3 amps that have BANANA jacks for connectivity, such as our MW and HY152A DC power supplies.

Connect the RED BANANA PLUG into the positive BANANA jack of the power supply (usually RED).
Connect the BLACK BANANA PLUG into the negative BANANA jack of the power supply (usually BLACK).

Connect the RED ALLIGATOR CLIP end of the cable to the positive connection of your device or use.
Connect the BLACK ALLIGATOR CLIP end of the cable to the negative connection of your device or use.

TENMA

Power
Leads

MediumDuty Leads

UniLead Kit

HeavyDuty Leads