MASTECH HY5005E-2 SWITCHING DUAL DC POWER SUPPLY
BRIGHT DUAL LED DISPLAY METERS
DUAL VARIABLE VOLTAGE: 0 TO 50 Volts + CURRENT: 0 TO 5 Amps
Brand New in Box

This dual output grounded DC power supply is of very high quality construction by MASTECH. Excellent for lab use with the two variable 0-50 volt 0-5 amp output. Other uses include science projects or any other use where stable voltage up to 30 volts is required. For the two variable outputs the voltage is variable from 0 to 50 volts and the current is also variable from 0 to 5 amps. The unit also has a switch to choose among INDEPENDENT, SERIES or PARALLEL operation which allows the choice of two independent 0-50V @ 0-5A outputs OR one 0-100V @ 0-5A output OR one 0-50V @ 0-10A output. The 2 digital LED meters display the actual voltage and current within 2 percent.

Both the voltage and the amperage are adjustable for absolute BEST precision.

Heavy duty, stable output, switching type with low noise, output polarity: positive and negative, low ripple voltage less than 0.5 mVp-p, overload protection circuit, state of art design and cooling heat sinks.

SPECIFICATIONS FOR THE MASTECH HY5005E-2 DC POWER SUPPLY:

Two Power Outputs:2 Variable: 0 - 50 Volts @ 0 - 5 Amps
Input Voltage: 110V 60Hz
Constant voltage/ Constant Current
Voltage and Current adjustment
Power effect: CV<0.01%+2mV, CC<0.2% + 2mA
Overload effect: CV<0.01% +3mV, CC<0.2% +3mA
Waves and noises: CV<0.5mV r.m.s, CC 3mA, r.m.s
Protection: Current limited & Short circuit protection
Operating Temperature : 0 - 102 F ( 0 -40 C), Relative Humidity: <90%
LCD Accuracy is within + or - 2%
Size: 13 1/2" x 10" x 8"
Weight: 19 lbs
6 Month Warranty

HEAVY DUTY DC POWER SUPPLY LEADS / CABLES
TWIN CABLES / RED + BLACK
BANANA PLUGS TO ALLIGATOR CLIPS
BRAND NEW

This heavy duty Power Supply Cable / Lead is appropriate for ALL our DC power supplies from the smallest MW 2 amp units up to the most powerful 20 amp HY3020D model that have BANANA jacks for connectivity.

Heavy Duty connecting cables / wire:
14 gauge, the banana plugs, alligator clips are heavy duty.

How to connect the leads:

Connect the RED BANANA PLUG into the positive BANANA jack of the power supply (usually RED).

Connect the BLACK BANANA PLUG into the negative BANANA jack of the power supply (usually BLACK).

Connect the RED ALLIGATOR CLIP end of the cable to the positive connection of your device or use.

Connect the BLACK ALLIGATOR CLIP end of the cable to the negative connection of your device or use.

MASTECH HY5005E-2 SWITCHING DUAL DC POWER SUPPLY

$249.95 + $34.95 S/H/I For domestic 48 state US shipments via UPS Ground. No shipments to AK, HI, PR, VI, Guam, PO Boxes or APO addresses

Mastech HY5005E-2 switching dual dc power supply

HY5005E-2 VARIABLE DC POWER SUPPLY
Excellent for lab use with the two variable 0-50 volt 0-5 amp output. Other uses include science projects or any other use where stable voltage up to 30 volts is required. For the two variable outputs the voltage is variable from 0 to 50 volts and the current is also variable from 0 to 5 amps.

VARIABLE DC POWER SUPPLY INFORMATION

MASTECH HY5005E-2 SWITCHING DC POWER SUPPLY
with 2 x 3 FEET HEAVY-DUTY POWER SUPPLY LEAD

$284.95 + $39.95 S/H/I For domestic 48 state US shipments via UPS Ground. No shipments to AK, HI, PR, VI, Guam, PO Boxes or APO addresses

This is a SWITCHING power supply and it does NOT work for all applications that a LINEAR would be appropriate.

Some of the applications that a SWITCHING power supply does NOT work for include Electroplating, Anodizing, Battery Charging and Chemical Experimentation.

HEAVY DUTY DC POWER SUPPLY LEADS / CABLESTWIN CABLES / RED + BLACKBANANA PLUGS TO ALLIGATOR CLIPSBRAND NEW

HEAVY DUTY DC POWER SUPPLY LEADS / CABLES
TWIN CABLES / RED + BLACK
BANANA PLUGS TO ALLIGATOR CLIPS
BRAND NEW