MASTECH HY3003F-3 LINEAR TRIPLE DC POWER SUPPLY
BRIGHT RED AND GREEN LED METERS
DUAL
VARIABLE VOLTAGE: 0 TO 30 Volts / CURRENT: 0 TO 3 Amps
The HY3003F-3 DUAL output grounded DC power supply is of very high quality construction
by MASTECH.
Excellent for lab use with the two variable 0-30 volt 0-3 amp outputs.
Other uses include science projects or any other use where stable voltage up to 30
volts is required.
For the two variable outputs the voltage is variable from 0 to 30 volts and the current
is also variable from 0 to 3 amps. There is a third DC output which is FIXED at 5
Volts and 3 Amps.
The 2 sets of dual digital color LED meters display the actual voltage and current
within 2 percent.
The unit also has a switch to choose among INDEPENDENT, SERIES or PARALLEL operation
which can provide either dual 0-30V @ 0-3A or one 0-60V @ 0-3A or one 0-30V @ 0-6A.
The complete MASTECH HY3003F-3 Linear DC Power Supply specifications:
- Output Voltage: 2 @ 0 - 30 Volts
- Output Current: 2 @ 0 - 3 Amps
- Input Voltage: 110V, 60Hz.
- Constant voltage/ Constant Current
- Voltage and Current adjustment
- Power effect: CV<0.01%+2mV, CC<0.2% + 2mA
- Overload effect: CV<0.01% +3mV, CC<0.2% +3mA
- Waves and noises: CV<0.5mV r.m.s, CC 3mA, r.m.s
- Protection: Current limited & Short circuit protection.
- Operating Temperature : 0 - 102 F ( 0 -40 C), Relative Humidity: <90%
- LED Accuracy is within + or - 2%
- Size: 14 x 10 x 8"
- Weight: 29 lbs
- 6 Months Warranty
HEAVY DUTY DC POWER SUPPLY LEADS / CABLES
TWIN CABLES / RED + BLACK
BANANA PLUGS TO
ALLIGATOR CLIPS
BRAND NEW
This heavy duty Power Supply Cable / Lead is appropriate for ALL our DC power supplies
from the smallest MW 2 amp units up to the most powerful 20 amp HY3020D model that
have BANANA jacks for connectivity.
Heavy Duty connecting cables / wire:
14
gauge, the banana plugs, alligator clips are heavy duty.
How to connect the leads:
Connect the RED BANANA PLUG end of the cable into the positive BANANA jack
of the
power supply (usually RED).
Connect the BLACK BANANA PLUG into the negative BANANA
jack of the power
supply (usually BLACK).
Connect the RED ALLIGATOR CLIP end of the
cable to the positive connection of
your device or use.
Connect the BLACK ALLIGATOR
CLIP end of the cable to the negative connection
of your device or use.
| 
